The VP88 is a stereo M/S microphone suitable for live sound reinforcement and studio recording. It incorporates two static capsules, one cardioid and one bi-directional, allowing for 3 stereo openings via internal matrixing, or M-S recording via external matrixing.It is unique in its ability to capture and reproduce the realism of a live event as well as its ease of adaptation to difficult production conditions.The first capsule (Mid) is forward-facing to capture sound from the centreline using a cardioid pickup pattern. The other (Side) is bi-directional, so it captures sound from both sides.The VP88 contains an internal M/S matrix with three settings to fine-tune the degrees of separation of the stereo image. The VP88 contains an internal M/S matrix with three settings to fine-tune the degrees of separation of the stereo image, so the internal matrix can be bypassed if an external matrix is used or a stereo image is created in post-production.Switches above the microphone control output mode, stereo image, bass management and battery.The VP88 can be run on phantom power or a 6V camera battery. Optional accessories such as a vibration damper and a 7.6 m (25 ft) microphone cable are available.
Frequency range: 40 Hz to 20 kHz/ Designed to transmit an optimal stereo image, direct control of the stereo broadcast. MS output available / Mono compatibility ideal for broadcast use / Very low noise and distortion / Wide dynamic range / Switchable, low frequency attenuation (12 dB / octave below 80 Hz) for reduced environmental and handling noise. / Operates on phantom power or 6V camera battery / LED voltage indicator / Internal vibration damper for reduced foot shake and handling noise / Supplied with XLR5-female to two XLR3-male Y-cable, windscreen and carrying case. /Technical Specifications:Weight:417 g/Height x Width x Depth:290.0 × 39.7 × 39.7 mm/Frequency Response:40 Hz - 20 kHz/Frequency Range:Flat/Sensitivity:Mid: -47.40, Side: -45.8 dBV.Pa - Mid : 4.26, Side 5.12 mV.Pa/Self-Noise Equivalent:24. 0 dB(A)/Sound pressure:129 dB/Transducer type:Condenser/Directivity:Bidirectional/Switchable low-cut filter:Yes/Connectors:XLR 3-pin/Attenuator:No/Interchangeable capsule:No/Main purpose:Broadcasting/Headphone output:No/Phantom power supply required:9-52v DC VDC/Cartridge:Fixed
We use cookies to keep our websites running and secure, and to help us provide you with the best possible experience. By clicking "Accept", you consent to the use of these cookies for advertising and analytical purposes.