Gain 0 dB or +3 dB (when input is 0.7 Vp-p, output is 0.7 V or 1.0 V), switchable
Bandwidth 350 MHz (-3 dB), fully loaded
Video input
Number/signal type 1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, composite video
NOTE These DAs are compatible with all the signal formats listed above when the gain DIP switch is set to 0.7 V. They are compatible with only RGBHV and RGBS when the gain DIP switch is set to 1.0 V.
Connectors 1 female 15-pin HD (optional Mac/VGA adapters are available)
Pin connections ID bits on pins 4, 11, 12, and 15 are passed through to local monitor output (loop-through).
The pin 9 connection is passed through to output 1.
Nominal level 1.0 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum levels Analog: 0.3 V to 1.5 Vp-p with no offset at unity gain
Impedance 75 ohms
Horizontal frequency 15 kHz to 135 kHz
Vertical frequency 30 Hz to 150 Hz
Return loss <-40 dB @ 5 MHz
Input coupling DC
Video output
Number/signal type
P/2 DA4xi 4 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, composite video (follows input type)
P/2 DA6xi 6 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, composite video (follows input type)
NOTE These DAs are compatible with all the signal formats listed above when the gain DIP switch is set to 0.7 V. They are compatible with only RGBHV and RGBS when the gain DIP switch is set to 1.0 V.
Connectors
P/2 DA4xi 4 female 15-pin HD
P/2 DA6xi 6 female 15-pin HD
Nominal level 1.0 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum levels 0.3 V to 1.5 Vp-p (follows input)
Impedance 75 ohms
Return loss <-40 dB @ 5 MHz
DC offset ±5 mV with input at 0 offset
Sync
Input type RGBHV, RGBS, RGsB, RsGsBs; bi-level and tri-level sync
Output type RGBHV, RGBS, RGsB, RsGsBs; bi-level and tri-level sync (follows input)
NOTE These DAs are compatible with all the signal formats listed above when the gain DIP switch is set to 0.7 V.
Input level 1.8 V to 5.0 Vp-p
Output level TTL: 5.0 Vp-p, unterminated
Input impedance 510 ohms
Output impedance 50 ohms
Max. propagation delay 60 ns
Max. rise/fall time 2 ns
Polarity Positive or negative (follows input)
General
Power Internal
100-240 VAC, 50-60 Hz, 12 watts
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling Convection, no vents
Mounting
Rack mount Yes, with optional 1U rack shelf
Furniture mount Yes, with optional under-desk mounting kit or through-desk mounting kit
Enclosure type Metal
Enclosure dimensions 1.6" H x 8.7" W x 6.0" D (1U high, half rack wide)
(4.1 cm H x 22.1 cm W x 15.2 cm D)
(Depth excludes connectors.)
Product weight 2.0 lbs (0.9 kg)
Shipping weight 3 lb (2 kg)
DIM weight
USA/Canada 3.7 lbs (1.7 kg)
International 4.3 lbs (2.0 kg)
Vibration ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety CE, c-UL, UL
EMI/EMC CE, C-tick, FCC Class A, ICES, KCC, VCCI
Environmental Complies with the appropriate requirements of RoHS, WEEE

Share via