Mac Aura, Mac Viper, Robe Wash...
Search
Log in Register
EN FR

AudioBP200 HME Full duplex beltpack 2 cx Plan 2Ghz (DX200)

Quantity
ex
Project List Available
The BP-200 beltpack features small size, robustness, ease of use and performance.

Compatible with the DX-100 and DX-200 bases, it uses the same 2.4GHz FHSS digital encryption technique.

Connection for a headset and BAT-40 battery powering from 14 to 20 hours depending on the mode (LOCK/PTT).
General
Frequency range: 2400-2483.5 MHz
Antennas: Internal, Diversity
Audio bandwidth: 200 Hz to 3.5 kHz
Security: 64-bit encryption
Battery: Rechargeable Lithium-Ion, supplied in duplicate
Battery life
Continuous talk time: 14 hours Push to talk time: 20 hours
Operating temperatures: -20 to 55°C
Size: .86.4 x 66 x 38.1 mm
Weight: 212 g with soft shell
Headset connector: Mini-DIN
Mic input: Electret
Headphone output: 160 mW for 32 Ω headphones
Load capacity 16-32 Ω
Controls: Power On/Off Listening Level (+/-) Intercom Transmit (IC) ISO Transmit (ISO) Indicators: Power/Transmit/Low Battery (LEDs & Voice Messages)
Protective shell & mounting: Soft SantopreneTM material
User license:Not required
Transmitter
Technique: Frequency hopping spread spectrum (FHSS)
Transmission modes: Continuous or momentary
Modulation: Gaussian filter, FSK, TDMA
Frequency stability: Exceeds ETSI/FCC standards over the operating temperature range
Harmonics/Parasitics: Levels below ETSI/FCC standards
Receiver
Technique: Frequency hopping spread spectrum (FHSS)
Sensitivity: <-90 dBm with 10-3 BER
RF dynamic range: -90 dBm to -20 dBm
Distortion: <2
Headset microphones: HS11 standard and HS20-3 optional (binaural)
Angled, moulded-in Mini-DIN plugs
Options/Accessories
BAT40 Lithium-Ion rechargeable battery
Fast 4 slot charger (2.5 to 3 hours charge time)
Protective shell/soft mount
10 or 76 cm antenna extension cable
Search for this product used on