Mac Aura, Mac Viper, Robe Wash...
Search
Log in Register
EN FR

AudioHKB-2X CLEARCOM HELIXNET 4 Channel Digital Desktop Box

Quantity
ex
Project List Available
Speaker Station

Easy to use front panel with OLED displays
Headset or hands free support with speaker and mic
(2) keysets freely assignable to system channels
Program Audio level control
Display swivels allowing optimal viewing angles

Connectivity

(1) Powerline Terminal Plug Connection
(1) Ethernet Network port with PoE

Mechanical

4-gang for flush mounting
Optional S-MOUNT for desktop use

The HelixNet System

Networked Intercom System
Flexible Cabling
12 partyline channels. Expandable to 24 channels via optional license
Program Audio distribution with independent level

Effortless Management

Easy to use CCM browser configuration
Fast front panel control and configuration
Plug-and-go with auto discovery
Central upgrades from main station

The HelixNet HKB-2X speaker station is a 4-gang flush-mountable user station with four channels over two shift pages supported by the HMS-4X main station.

Note: Access the HelixNet Cabling Calculator to calculate estimated maximum cable length for a single Clear-Com HelixNet digital partyline connection.

The HelixNet IP networking guide provides specifications, best practices and guidance for the integration of HelixNet into an existing or new IP network.

Channels

System provides 12 or 24 intercom channels. Four channels can be assigned to station keysets. System Program Audio can be associated with any channel with independent endpoint level control.
Connectors

Powerline: Powerline, Terminal Block 5 pole, 5mm pitch

Ethernet/PoE: RJ45

Headset: 4-pin XLR–M

Gooseneck Mic: 3-pin Tuchel

Input Power Connector: Terminal Block 2 Pole, 5mm
Microphone Pre-amplifier

Headset Mic Impedance: 200Ω (Dynamic)

Headset Mic Voltage: 1.7V (Electret selectable)

Limiter: +23dB

Route to four-wire output at 0dBu out:

Mic Gain: 60dB (Dynamic), 45dB (Electret)

Frequency Response: 300Hz – 10 kHz ± 3dB, contoured for intelligibility

Distortion: <0.1% THD @ 1kHz

Noise: <-65dBu

Headphone Limiter: 0dB (selectable)
Headphone Amplifier

Load Impedance: >32Ω

Output Level: +12dBu before clipping

Sidetone: -12dB (selectable)

Route from a four-wire input at 0dBu in:

Max Gain: 0dB

Frequency Response: 40Hz – 10kHz ±3dB

Distortion: <0.1% THD @ 1kHz

Noise: -65dBu

Headphone Limiter: 0dB (selectable)
Loudspeaker Amplifier

Load Impedance: 8Ω

Output Level: +18dBu before clipping

Route from a 4-wire input at 0dBu in:

Max Gain: 18dB

Frequency Response: 200Hz – 10kHz ±3dB

Distortion: <0.1% THD @ 1kHz

Noise:<-50dBu
Device Power

Voltage: 48V DC

Current (Max): 0.3A

Power (Max): 14.4W

BTU (Max): 49 BTU/hr

Input Power Connector: Terminal Block 2 Pole, 5mm

This unit can be powered via:

Powerline:

Input Voltage: ±29.5V DC

Input Current (Speaker Off): 0.3A

Input Current (Max): 0.5A

Powerline Utilization:

HKB (Local Power) = 1 beltpack

HKB (Speaker Off) = 2 beltpacks

HKB (Speaker On) = 3 beltpacks

Note the maximum Powerline capacity of the HMS-4X.

AC Adapter – Wall (not included)

Input Voltage Range: 100 – 240V AC

Input Frequency Range: 50 – 60Hz

Input Power Connector: Universal

Output Voltage: 48V DC

Output Power (Max): 15W

Output Power Connector: KPPX-3-P

PoE – Power over Ethernet

IEEE 802.3af-2003 – Class 0

PSE: 15.4 W DC max @ Power Source Requirement

PD: 12.95 W DC max @ Powered Device Draw
Environmental

32º – +113ºF (0 – +45ºC)

90% relative humidity
Dimensions

4.5 x 8.2 x 2.4 in (HxWxD)

(114 x 209 x 61 mm)
Weight

18.8 oz (0.53 kg)
Search for this product used on