Dimensions
44 x 483 x 373 mm

Frequency response
30 Hz - 20 kHz (1.5 dB)

Total harmonic distortion (THD)
< 0.03 % (@ 1 kHz)

Weight
Approx. 5.2 kg

Power supply
Max. 35 W

Audio output
Digital Audio outputs: AES3-2003, XLR-3: 48 kHz, 96 kHz, 24 bits
Dante™, RJ-45: 48 kHz, 96 kHz, 24 bit Can be
Can be synchronised to an external signal using WCLK return via BNC sockets
Analog Audio Outputs: XLR-3 and 6.35 mm jack per channel (transformer balanced)
-10 dBu to +18 dBu in 1 dB steps (2 kΩ)

Storage temperature
Storage: -25 °C to +70 °C

Operating temperature
Operating : -10 °C to +50 °C

Switchable bandwidth
244 MHz

Power supply
100 - 240 V AC, 50/60 Hz


Dimensions
44 x 483 x 373 mm

Frequency response
30 Hz - 20 kHz (1.5 dB)

Total harmonic distortion (THD)
< 0.03 % (@ 1 kHz)

Weight
Approx. 5.2 kg

Power supply
Max. 35 W

Audio output
Digital Audio outputs: AES3-2003, XLR-3: 48 kHz, 96 kHz, 24 bits
Dante™, RJ-45: 48 kHz, 96 kHz, 24 bit Can be
Can be synchronised to an external signal using WCLK return via BNC sockets
Analog Audio Outputs: XLR-3 and 6.35 mm jack per channel (transformer balanced)
-10 dBu to +18 dBu in 1 dB steps (2 kΩ)

Storage temperature
Storage: -25 °C to +70 °C

Operating temperature
Operating : -10 °C to +50 °C

Switchable bandwidth
244 MHz

Power supply
100 - 240 V AC, 50/60 Hz


Dimensions
44 x 483 x 373 mm

Frequency response
30 Hz - 20 kHz (1.5 dB)

Total harmonic distortion (THD)
< 0.03 % (@ 1 kHz)

Weight
Approx. 5.2 kg

Power supply
Max. 35 W

Audio output
Digital Audio outputs: AES3-2003, XLR-3: 48 kHz, 96 kHz, 24 bits
Dante™, RJ-45: 48 kHz, 96 kHz, 24 bit Can be
Can be synchronised to an external signal using WCLK return via BNC sockets
Analog Audio Outputs: XLR-3 and 6.35 mm jack per channel (transformer balanced)
-10 dBu to +18 dBu in 1 dB steps (2 kΩ)

Storage temperature
Storage: -25 °C to +70 °C

Operating temperature
Operating : -10 °C to +50 °C

Switchable bandwidth
244 MHz

Power supply
100 - 240 V AC, 50/60 Hz


Dimensions
44 x 483 x 373 mm

Frequency response
30 Hz - 20 kHz (1.5 dB)

Total harmonic distortion (THD)
< 0.03 % (@ 1 kHz)

Weight
Approx. 5.2 kg

Power supply
Max. 35 W

Audio output
Digital Audio outputs: AES3-2003, XLR-3: 48 kHz, 96 kHz, 24 bits
Dante™, RJ-45: 48 kHz, 96 kHz, 24 bit Can be
Can be synchronised to an external signal using WCLK return via BNC sockets
Analog Audio Outputs: XLR-3 and 6.35 mm jack per channel (transformer balanced)
-10 dBu to +18 dBu in 1 dB steps (2 kΩ)

Storage temperature
Storage: -25 °C to +70 °C

Operating temperature
Operating : -10 °C to +50 °C

Switchable bandwidth
244 MHz

Power supply
100 - 240 V AC, 50/60 Hz


Antenna connector
Input 2x BNC (50 Ω), 12 V DC, max. 200 mA each via antenna sockets, short circuit proof, Output 2 x BNC (50 Ω)

Codec
SePAC (Sennheiser Performance Audio Codec)

Dynamic range
111 dB (A) type

Frequency range
470 - 714 MHz

Headphone output level
6.35 mm jack, 2 x 100 mW at 32 Ω

Image frequency roll-off
> 100 dB typ.

Sensitivity
-100 dBm typ.

Word clock
Input: BNC, 75 Ω
Output: BNC, 75 Ω
Sampling Rates: 48 kHz, 96 kHz

Relative humidity Operating
Operation: max. 85% at 40°C (non-condensing)
Storage: max. 90% at 40°C (non-condensing)

Transmission method
Digital modulation, "LR" mode Minimum spacing for equidistant frequency grid: 600 kHz

Latency
Analogue audio output: 3 ms
Digital audio output: 3 ms (AES/EBU)


Audio codec
SePAC (Sennheiser Performance Audio Codec)

Network protocol
IEEE 802.3-2002 (10/100 Mbit/s), shielded RJ-45 connection

Receiver principle
Dual superheterodyne

Diversity principle
True bit diversity

Encryption
AES 256

Daisy chain outputs
2x BNC (50 Ω) 0 dB +/- 0.5 dB amplification relative to antenna inputs

Receiving channels
2

Daisy-chained receivers (RF)
Max. 8 EM 6000 units

Dante™
IEEE 802.3 (1000 Mbit/s), shielded RJ-45 connection

Power plug
3-pin, Class I protection, IEC/EN 60320-1 compliant

Water protection rating
The product must not be exposed to run-off or splash water (IP2X)

Share via