AudioFIOF00-F DPA D:fine Micro omnidirectional Beige 110mm Microdot
Quantity
ex
Project List Available
Description
Characteristics
Share
Product file
DPA Microphones d:fine Dual-Ear Omnidirectional Headset Microphone with Microdot Termination and 110mm Long Boom, Adaptor Required, 20Hz-20kHz, Beige .The d:fine omnidirectional dual-ear headset microphone offers accurate, natural voice intelligibility and very high SPL handling. This microphone is perfect for all applications where sound quality and mobility are required. The flexible headset and dual-ear hooks mean this mic will stay in position even during vigorous movement. It is easy to change the cable, boom length or color and the boom from one side to the other. The d:fine mic comes with boom, cable and accessories like foam windscreens and make-up cover.
Directional pattern:Omnidirectional/
Principle of operation:Pressure or pressure gradient/
Cartridge type:Pre-polarized condenser/
Frequency range:20Hz-20kHz.20Hz-20kHz with 3dB soft boost at 8-15kHz/
Sensitivity:Nominal +/- 3dB at 1kHz: 6mV/Pa.-44dB re. 1V/Pa/
Equivalent noise level:A-Weighted:Typical: 26dB (A) re. 20Pa.Maximum: 28dB (A).
ITU-R BS.468-4:Typical: 38dBMaximum: 40dB/
S/N ratio:(A-weighted) re. 1kHz at 1Pa (94dB SPL): Typ. 68dB(A)/
Total Harmonic Distortion (THD):
<1 % up to 123dB SPL peak
<1 % up to 120dB SPL RMS sine/
Dynamic range:Typical: 97dB/
Max. SPL:Peak before clipping: 144dB/
Output impedance:
From MicroDot: 30-40Ohms
From DAD6001-BC: 100Ohms/
Cable drive capability:
Up to 984' / 299.93m with DAD6001-BC XLR adapter/
Output balance principle:
Signal balanced with DAD6001-BC XLR adapter/
Common Mode Rejection Ratio (CMRR):
> 60dB from 50Hz to 15kHz with DAD6001-BC XLR adapter/
Power supply:
Min. 5V to max. 50V through DPA adapter for wireless systems
48V phantom power +/-4V with DAD6001-BC XLR adapter/
Current consumption:
Typ. 1.5mA (microphone)
3.5mA with DAD6001-BC XLR adapter/
Connector:Microdot termination/
Polarity:+V at MicroDot pin for positive sound pressure (and pin 2 on DAD6001-BC XLR adapter)/
Temperature range:-40 to 45 deg. C / -40 to 113 deg. F
Relative Humidity (RH)
:Up to 90%
/
Electro Magnetic Compatibility (EMC):
Fully compatible
/
Capsule diameter
: 0.2" / 5.08mm/
Mic boom length
:110mm / 4.33"
/
Cable length:
4.3' / 1.31m
/
Cable diameter
:0.06" / 1.52mm/
Dimensions (H x W x D)
:Microphone head: 0.37 x 0.21 x 0.11" / 9.40 x 5.33 x 2.79mm
/
Weight
:Microphone boom: 0.8g / 0.03oz.
Earhook: 1.1g / 0.04oz
.Cable: 6.6g / 0.23oz.
Total: 8.5g / 0.30oz
Principle of operation:Pressure or pressure gradient/
Cartridge type:Pre-polarized condenser/
Frequency range:20Hz-20kHz.20Hz-20kHz with 3dB soft boost at 8-15kHz/
Sensitivity:Nominal +/- 3dB at 1kHz: 6mV/Pa.-44dB re. 1V/Pa/
Equivalent noise level:A-Weighted:Typical: 26dB (A) re. 20Pa.Maximum: 28dB (A).
ITU-R BS.468-4:Typical: 38dBMaximum: 40dB/
S/N ratio:(A-weighted) re. 1kHz at 1Pa (94dB SPL): Typ. 68dB(A)/
Total Harmonic Distortion (THD):
<1 % up to 123dB SPL peak
<1 % up to 120dB SPL RMS sine/
Dynamic range:Typical: 97dB/
Max. SPL:Peak before clipping: 144dB/
Output impedance:
From MicroDot: 30-40Ohms
From DAD6001-BC: 100Ohms/
Cable drive capability:
Up to 984' / 299.93m with DAD6001-BC XLR adapter/
Output balance principle:
Signal balanced with DAD6001-BC XLR adapter/
Common Mode Rejection Ratio (CMRR):
> 60dB from 50Hz to 15kHz with DAD6001-BC XLR adapter/
Power supply:
Min. 5V to max. 50V through DPA adapter for wireless systems
48V phantom power +/-4V with DAD6001-BC XLR adapter/
Current consumption:
Typ. 1.5mA (microphone)
3.5mA with DAD6001-BC XLR adapter/
Connector:Microdot termination/
Polarity:+V at MicroDot pin for positive sound pressure (and pin 2 on DAD6001-BC XLR adapter)/
Temperature range:-40 to 45 deg. C / -40 to 113 deg. F
Relative Humidity (RH)
:Up to 90%
/
Electro Magnetic Compatibility (EMC):
Fully compatible
/
Capsule diameter
: 0.2" / 5.08mm/
Mic boom length
:110mm / 4.33"
/
Cable length:
4.3' / 1.31m
/
Cable diameter
:0.06" / 1.52mm/
Dimensions (H x W x D)
:Microphone head: 0.37 x 0.21 x 0.11" / 9.40 x 5.33 x 2.79mm
/
Weight
:Microphone boom: 0.8g / 0.03oz.
Earhook: 1.1g / 0.04oz
.Cable: 6.6g / 0.23oz.
Total: 8.5g / 0.30oz