-Premium stage microphone with Shure quality, ruggedness, and reliability. Uniform cardioid polar pattern for maximum gain before feedback and excellent off-axis rejection. -Uniform, extended frequency response with slight presence boost and controlled proximity effect, optimized for vocals. -Advanced internal capsule suspension system absorbs mechanical shock and minimizes handling noise. -Very low sensitivity to radio frequency and electromagnetic hum. Strain-relief steel grille and enameled metal alloy construction resists wear and abuse. -Effective internal noise filter reduces unwanted wind and breath noise. -Type: Electret condenser. -Frequency response: 50 to 16,000 Hz. -Polar pattern: Cardioid. -Output impedance: Nominal EIA at 150 Ω (100 Ω real). -Sensitivity: at 1 kHz, open circuit voltage-51 dBV/Pa(2 mV)[1]. -Maximum SPL:1 kHz with 1% THD,1 kΩ/139 dB load. -Signal to noise ratio: 70.5 dB[2]. -Dynamic range: at 1 kHz, 1 kΩ/117 dB load. -Clipping level: 1 kHz with THD of 0.25%,Load of 1 kΩ/-6 dBV(0.5 V) -Eigen noise:typical,SPL equivalent,A-weighted/22 dB -Humor capture: typical, at 60 Hz, SPL/mOe equivalent/5 dB. -Polarity: Positive sound pressure on the diaphragm produces a positive voltage on pin 2 relative to pin 3. Connector: Three-pin professional audio (XLR), male, balanced. -Enclosure: Aluminum construction with blue painted metallic finish and hardened steel grille with satin nickel-chrome plating. -Power supply: 11 to 52 VDC phantom power (1.2 mA)/[1] 1 Pa=94 dB SPL[2] S/N ratio is difference between 94 dB SPL and equivalent SPL of self noise, A-weighted. *Weight -Packed: 0.565 kg (1.24 lb). -Net :0,207 kg(0,475 lb).

Share via