VideoVP 12 K 1400*1050 // PT-D12000
Quantity
ex
Project List Available
Description
Characteristics
Share
Product file
The PT-D12000U features an innovative 4-lamp optical system, as well as Geometric Adjustment and Edge Blending functions to accommodate diverse projection styles. Panasonic's exclusive Detail Clarity Processor gives images extremely realistic textures, and the DLP® system resists image degradation over time.
Incredible Brightness & High Picture Quality
High-Resolution WUXGA Images
In response to the increasing popularity of wide-screen image viewing, the PT-DZ12000 features native WUXGA resolution to cover full-HD specifications. This brings you lifelike projection of intricate, highly detailed images.
New AC Lamp and Multi-Lamp System
Panasonic's innovative 4-lamp optical system uses newly developed 300-watt AC lamps to deliver remarkable 12,000-lumen/10,000-lumen brightness. The 4-lamp system means superb reliability too - the projector keeps working even if one lamp goes out. A full 24 hours of continuous operation is possible in Lamp Relay mode.
Detail Clarity Processor
Exclusive to Panasonic, this new image-processing circuit analyzes the video signal frequency range for each scene by extracting data on the distribution of high, mid, and low-frequency components, and brings out fine details accordingly. The resulting images have a more natural, three dimensional appearance with crisp, clear detail.
System Daylight View
Screen visibility is lower when a projector is used during daylight hours or in a room with lights on. Panasonic's System Daylight View circuit compensates for these brighter environments, so that images are crisp, clear and easy to see no matter what the conditions are.
Dynamic Iris
Panasonic's Dynamic Iris uses a scene-linking aperture mechanism to achieve a remarkable 5,000:1 contrast without lowering the 12,000-lumen/10,000-lumen brightness. It helps reproduce deeper, richer blacks and gives images more detailed textures.
3D Color Management
Some people like to view large-screen images from relatively close up to get the maximum viewing impact. But at close range, the colors perceived by the human eye tend to differ slightly from the original colors. The 3D Color Management System solves this problem by enabling fine adjustment of colors so they appear faithful to the originals when projected onto a large screen.
Full 10-Bit Processing
Use of a full 10-bit picture processing system helps achieve smooth tonal expression. Complexions and other flesh tones look natural and true-to-life, with accurate gradation.
Dual Link HD-SDI Signal Support
Just add an ET-MD100SD4 expansion board and the projector supports Dual Link HD-SDI signals. HD-SDI signals use two cables to achieve twice the color resolution of the conventional single link system.
High Reliability & Stability
Auto Cleaning Robot
Panasonic's Auto Cleaning Robot automatically cleans the air filter to help keep the projector running smoothly. When the projector is switched on,*1 the robot uses a brush to clear away any dust adhering to the filter, helping to prevent clogs that can impair operation or cause malfunctions. The projector can be used for around 2,000 hours before the filter needs to be cleaned, making it a good choice for installation in tight spaces or for ceiling-mounted applications. Also, the Micro-Cut Air Filter traps particles as small as 10 microns.*2 This greatly reduces the amount of dust entering the projector, helping maintain high brightness and stable operation.
Incredible Brightness & High Picture Quality
High-Resolution WUXGA Images
In response to the increasing popularity of wide-screen image viewing, the PT-DZ12000 features native WUXGA resolution to cover full-HD specifications. This brings you lifelike projection of intricate, highly detailed images.
New AC Lamp and Multi-Lamp System
Panasonic's innovative 4-lamp optical system uses newly developed 300-watt AC lamps to deliver remarkable 12,000-lumen/10,000-lumen brightness. The 4-lamp system means superb reliability too - the projector keeps working even if one lamp goes out. A full 24 hours of continuous operation is possible in Lamp Relay mode.
Detail Clarity Processor
Exclusive to Panasonic, this new image-processing circuit analyzes the video signal frequency range for each scene by extracting data on the distribution of high, mid, and low-frequency components, and brings out fine details accordingly. The resulting images have a more natural, three dimensional appearance with crisp, clear detail.
System Daylight View
Screen visibility is lower when a projector is used during daylight hours or in a room with lights on. Panasonic's System Daylight View circuit compensates for these brighter environments, so that images are crisp, clear and easy to see no matter what the conditions are.
Dynamic Iris
Panasonic's Dynamic Iris uses a scene-linking aperture mechanism to achieve a remarkable 5,000:1 contrast without lowering the 12,000-lumen/10,000-lumen brightness. It helps reproduce deeper, richer blacks and gives images more detailed textures.
3D Color Management
Some people like to view large-screen images from relatively close up to get the maximum viewing impact. But at close range, the colors perceived by the human eye tend to differ slightly from the original colors. The 3D Color Management System solves this problem by enabling fine adjustment of colors so they appear faithful to the originals when projected onto a large screen.
Full 10-Bit Processing
Use of a full 10-bit picture processing system helps achieve smooth tonal expression. Complexions and other flesh tones look natural and true-to-life, with accurate gradation.
Dual Link HD-SDI Signal Support
Just add an ET-MD100SD4 expansion board and the projector supports Dual Link HD-SDI signals. HD-SDI signals use two cables to achieve twice the color resolution of the conventional single link system.
High Reliability & Stability
Auto Cleaning Robot
Panasonic's Auto Cleaning Robot automatically cleans the air filter to help keep the projector running smoothly. When the projector is switched on,*1 the robot uses a brush to clear away any dust adhering to the filter, helping to prevent clogs that can impair operation or cause malfunctions. The projector can be used for around 2,000 hours before the filter needs to be cleaned, making it a good choice for installation in tight spaces or for ceiling-mounted applications. Also, the Micro-Cut Air Filter traps particles as small as 10 microns.*2 This greatly reduces the amount of dust entering the projector, helping maintain high brightness and stable operation.
DLP™ chip Panel size : 0.95" diagonal (4:3 aspect ratio)
DLP™ chip Display Method :DLP™ chip x 3 (R, G, B), DLP™ projection system
DLP™ chip Pixels : 1,470,000 (1,400 x 1,050) x 3, total of 4,410,000 pixels
Lamp : 300 W UHM lamp x 4 (four lamp system)
Brightness 1 : 12,000 lumens (four-lamp operation mode)
Contrast Ratio : 5,000:1 (full on/full off, in Dynamic iris 3 mode)
Resolution : 1,400 x 1,050 pixels (1,920 x 1,200 pixels compatible, compression mode)
Lens : Optional powered zoom/focus lenses
Screen Size : 70 - 600 inches, 4:3 aspect ratio (70-300 inches, 4:3 aspect ratio with the ET-D75LE5)
Lens Shift 2 :
Vertical: ±50% (±40° with the ET-D75LE6) from center of screen, powered
Horizontal: ±30% (±20° with the ET-D75LE6) from center of screen, powered
Scanning Frequency RGB 3 : fH 15-100 kHz, fV 24-120 Hz / Dot clock 20-162 MHz
Scanning Frequency YPBPR (YCBCR) : 480i, 480p, 576i, 576p, 720/60p, 720/50p, 1035/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p, 1080/60i, 1080/50i, 1080/50p, 1080/60p
Scanning Frequency S-Video/Video : fH 15.75/15.63 kHz, fV 50/60Hz (NTSC, NTSC4.43, PAL, PAL60, PAL-N, PAL-M,S ECAM)
Terminal - Video In : BNC x 1, 1.0 Vp-p
Terminal - Video Out : BNC x 1, 1.0 Vp-p
Terminal - S Video In : Mini DIN 4-pin x 1
Terminal - RGB 1 / YPBPR IN : BNC x 5
Terminal - RGB 2 IN : D-sub HD 15-pin x 1
Terminal - DVI-D IN : DVI-D 24-pin x 1, DVI 1.0 compliant, compatible with HDCP, single link480p, 576p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, 720/60p, 720/50pVGA (640 x 480) - WUXGA4(1,920 x 1,200) compatible with non-interlaced signals only, Dot clock: 25-162 MHz
Terminal - SERIAL IN4 : D-sub 9-pin female x 2 (RS232C x 1, RS422 x 1)
Terminal - SERIAL OUT4 : D-sub 9-pin male x 1 (RS422 x 1)
Terminal - REMOTE 1 IN : M3 jack x1 for wired remote control
Terminal - REMOTE 1 OUT : M3 jack x1 for link control
Terminal - REMOTE 2 IN : D-sub 9-pin female x 1 for external control (parallel)
Terminal - LAN : RJ-45 (10 Base-T/100 Base-TX) x 1, compatible with PJLink™
Optional board slot 5 - With ET-MD77SD1 installed:
SERIAL IN: BNC x 1
SD-SDI signal (YCBCR 4:2:2 10-bit) : SMPTE 259M compliant, 480i, 576i
SERIAL OUT: BNC x 1, active through
Optional board slot 5 - With ET-MD77SD3 installed :
SERIAL IN: BNC x 1
SD-SDI signal (YCBCR 4:2:2 10-bit) : SMPTE 259M compliant, 480i, 576i
Single-link HD-SDI signal (YCBCR 4:2:2 10-bit) : SMPTE 292M compliant 720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p
SERIAL OUT: BNC x 1, active through
Optional board slot 5 - With ET-MD100SD4 installed:
Link A/Link B IN: BNC x 1 for each
SD-SDI signal (YCBCR 4:2:2 10-bit) : SMPTE 259M compliant, 480i, 576i
Single-link HD-SDI signal (YCBCR 4:2:2 10-bit) : SMPTE 292M compliant, 720/50p, 720/60p, 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p
Dual-link HD-SDI signal (RGB 4:4:4 12-bit/10-bit) : SMPTE 372M compliant, 1920 x 1080/50i, 1920 x 1080/60i, 1920 x 1080/25p, 1920 x 1080/24p, 1920 x 1080/24sF, 1920 x 1080/30p
Dual-link HD-SDI signal (X'Y'Z' 4:4:4 12-bit) : 2048 x 1080/24p, 2048 x 1080/24sF
Optional board slot 5 - With ET-MD77DV installed:
DVI-D IN: DVI-D 24-pin x 1, DVI 1.0 compliant, compatible with HDCP, single link
480p, 576p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, 720/60p, 720/50p
VGA (640 x 480) - WUXGA6(1,920 x 1,200)5?162 MHz
Keystone correction range: Vertical: ±40° (±22° with the ET-D75LE5, ±28° with the ET-D75LE6),Using Geometric Adjustment: Vertical ±10°, Horizontal ±15°
Installation: Front/rear, ceiling/floor
Power cord length : 9.9'' (3.0 m)
Power Supply : 120 VAC, 9-16A, 50/60Hz
Power Consumption : 1,600-1,500 W (10-15 W in standby mode with fan stopped)
Operating temperature 8 : 32-113 °F (0-45°C)
Operating humidity : 10-80% (no condensation)
DLP™ chip Display Method :DLP™ chip x 3 (R, G, B), DLP™ projection system
DLP™ chip Pixels : 1,470,000 (1,400 x 1,050) x 3, total of 4,410,000 pixels
Lamp : 300 W UHM lamp x 4 (four lamp system)
Brightness 1 : 12,000 lumens (four-lamp operation mode)
Contrast Ratio : 5,000:1 (full on/full off, in Dynamic iris 3 mode)
Resolution : 1,400 x 1,050 pixels (1,920 x 1,200 pixels compatible, compression mode)
Lens : Optional powered zoom/focus lenses
Screen Size : 70 - 600 inches, 4:3 aspect ratio (70-300 inches, 4:3 aspect ratio with the ET-D75LE5)
Lens Shift 2 :
Vertical: ±50% (±40° with the ET-D75LE6) from center of screen, powered
Horizontal: ±30% (±20° with the ET-D75LE6) from center of screen, powered
Scanning Frequency RGB 3 : fH 15-100 kHz, fV 24-120 Hz / Dot clock 20-162 MHz
Scanning Frequency YPBPR (YCBCR) : 480i, 480p, 576i, 576p, 720/60p, 720/50p, 1035/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p, 1080/60i, 1080/50i, 1080/50p, 1080/60p
Scanning Frequency S-Video/Video : fH 15.75/15.63 kHz, fV 50/60Hz (NTSC, NTSC4.43, PAL, PAL60, PAL-N, PAL-M,S ECAM)
Terminal - Video In : BNC x 1, 1.0 Vp-p
Terminal - Video Out : BNC x 1, 1.0 Vp-p
Terminal - S Video In : Mini DIN 4-pin x 1
Terminal - RGB 1 / YPBPR IN : BNC x 5
Terminal - RGB 2 IN : D-sub HD 15-pin x 1
Terminal - DVI-D IN : DVI-D 24-pin x 1, DVI 1.0 compliant, compatible with HDCP, single link480p, 576p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, 720/60p, 720/50pVGA (640 x 480) - WUXGA4(1,920 x 1,200) compatible with non-interlaced signals only, Dot clock: 25-162 MHz
Terminal - SERIAL IN4 : D-sub 9-pin female x 2 (RS232C x 1, RS422 x 1)
Terminal - SERIAL OUT4 : D-sub 9-pin male x 1 (RS422 x 1)
Terminal - REMOTE 1 IN : M3 jack x1 for wired remote control
Terminal - REMOTE 1 OUT : M3 jack x1 for link control
Terminal - REMOTE 2 IN : D-sub 9-pin female x 1 for external control (parallel)
Terminal - LAN : RJ-45 (10 Base-T/100 Base-TX) x 1, compatible with PJLink™
Optional board slot 5 - With ET-MD77SD1 installed:
SERIAL IN: BNC x 1
SD-SDI signal (YCBCR 4:2:2 10-bit) : SMPTE 259M compliant, 480i, 576i
SERIAL OUT: BNC x 1, active through
Optional board slot 5 - With ET-MD77SD3 installed :
SERIAL IN: BNC x 1
SD-SDI signal (YCBCR 4:2:2 10-bit) : SMPTE 259M compliant, 480i, 576i
Single-link HD-SDI signal (YCBCR 4:2:2 10-bit) : SMPTE 292M compliant 720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p
SERIAL OUT: BNC x 1, active through
Optional board slot 5 - With ET-MD100SD4 installed:
Link A/Link B IN: BNC x 1 for each
SD-SDI signal (YCBCR 4:2:2 10-bit) : SMPTE 259M compliant, 480i, 576i
Single-link HD-SDI signal (YCBCR 4:2:2 10-bit) : SMPTE 292M compliant, 720/50p, 720/60p, 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p
Dual-link HD-SDI signal (RGB 4:4:4 12-bit/10-bit) : SMPTE 372M compliant, 1920 x 1080/50i, 1920 x 1080/60i, 1920 x 1080/25p, 1920 x 1080/24p, 1920 x 1080/24sF, 1920 x 1080/30p
Dual-link HD-SDI signal (X'Y'Z' 4:4:4 12-bit) : 2048 x 1080/24p, 2048 x 1080/24sF
Optional board slot 5 - With ET-MD77DV installed:
DVI-D IN: DVI-D 24-pin x 1, DVI 1.0 compliant, compatible with HDCP, single link
480p, 576p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, 720/60p, 720/50p
VGA (640 x 480) - WUXGA6(1,920 x 1,200)5?162 MHz
Keystone correction range: Vertical: ±40° (±22° with the ET-D75LE5, ±28° with the ET-D75LE6),Using Geometric Adjustment: Vertical ±10°, Horizontal ±15°
Installation: Front/rear, ceiling/floor
Power cord length : 9.9'' (3.0 m)
Power Supply : 120 VAC, 9-16A, 50/60Hz
Power Consumption : 1,600-1,500 W (10-15 W in standby mode with fan stopped)
Operating temperature 8 : 32-113 °F (0-45°C)
Operating humidity : 10-80% (no condensation)