AudioDX200 HME Base HF full duplex 2cx plan 2Ghz
Quantity
ex
Project List Available
Description
Characteristics
Share
Product file
The DX-200 base station features ease of use, performance and the ability to connect to another 2 and/or 4 wire secondary intercom system.
It uses the same 2.4GHz digital FHSS encryption technique in diversity, which offers increased privacy by optimising reception.
It can be powered by an external 12V supply.
15 compact and very robust mobile stations (BP-200) can be used simultaneously of which 4 in FULL DUPLEX, these numbers can be doubled by coupling two DX-200 bases.
It uses the same 2.4GHz digital FHSS encryption technique in diversity, which offers increased privacy by optimising reception.
It can be powered by an external 12V supply.
15 compact and very robust mobile stations (BP-200) can be used simultaneously of which 4 in FULL DUPLEX, these numbers can be doubled by coupling two DX-200 bases.
GENERAL ⎯Frequency Range: 2400 – 2483.5 MHz Frequency Response: 200 Hz to 3.5 kHz Power Requirements: 100-240VAC, 50-60Hz or 12-14VDC Temperature Range: 32-122°F (0-50°C) Size: 19” x 1.72” x 17.13” (1-RU) (48.26 x 4.37 x 43.51 cm) Weight: 9.2 lbs. (4.18 kg) maximum # of Beltpacs per Base: 15 can be registered Any 4 can have simultaneous full-duplex communication at one time 4-Wire I/O: RJ45, 600Ω balanced, level adjustable, simultaneous operation with 2-wire 2-Wire I/O: XLR-3M, XLR-3F, externally-switchable RTS®or Clear-Com®mode, 200Ω, level adjustable, null adjustable Auxiliary Input: XLR-3F/¼” (6.35 mm) combo jack, 600Ω balanced, level adjustable Auxiliary Output: XLR-3M, 600Ω balanced, level adjustable 8Ω Speaker Output: 1W into 8ΩHeadset Connector: 4-pin mini-DIN Electret microphone Headset Output: 250mW into 32ΩFront Panel Controls: Power switch Reset Registration, Reset, Unlatch and Register Beltpac buttons, IC and ISO Receive level adjustments, IC 2W/4W and 4W-Only buttons, IC4W-Only Send and Receive level adjustments, Auxiliary In and ISO+ buttons, Auxiliary In and Out level adjustments, Rotary knob for volume adjustment, Headset IC/ISO Select button and Headset Talk button Front Panel Indicators: Registration Status indicator, IC and ISO Receive LEDs, IC 2W and 4W-Only LEDs, Auxiliary In/Out LEDs, Headset IC/ISO select LEDs, Headset PTT LED Rear Panel Controls: Clear-Com®/RTS® mode switch, RTS® Channel 1/2 switch, 2-wire channel line null adjustment Antenna Type: External ½ -wave dipole (R-TNC connector) RX/TX horizontal/vertical diversity System Distortion: <2% Communication Security: 64-bit encryption dual-slot diversity TRANSMITTER ⎯Type: Frequency hopping, spread spectrum Transmit Power: 100mW burst Modulation Type: Gaussian filtered FSK, TDM Frequency Stability: 13 ppm Harmonics/Spurious: Exceeds FCC and ETSI specifications over temperature RECEIVER ⎯Type: Frequency hopping, spread spectrum RF Sensitivity: <−90dBm w 10-3 BER Frequency Stability: 13 ppm Distortion: <2%