AudioTLM127 NEUMANN Omni. Cardio.with remote control
Quantity
ex
Project List Available
Description
Characteristics
Share
Product file
The TLM 127 is a large-diaphragm studio microphone with omnidirectional and cardioid directional characteristics. In addition, via a special power supply it is possible to use remote control to switch between the five directional characteristics: omnidirectional, wide-angle cardioid, cardioid, hypercardioid and figure-8. The key features of the microphone are especially low self-noise combined with an impressive dynamic range, modern transformerless circuit technology, exceptionally clean, transparent sound transmission.
The TLM 127 is addressed from the side. On the front of the microphone is the switch for selecting the directional characteristic. There are 3 settings: omnidirectional, cardioid, and remote control ("R"). On the back of the microphone is a 14-dB attenuation switch, as well as a high-pass filter switch with 2 settings: -3 dB cut-off frequency at 15 Hz ("LIN"), and 100 Hz.
Acoustical operating principle : Pressure gradient transducer/
Directional Pattern : Omnidirectional, cardioid, (wide angle cardioid, hypercardioid and figure-8 also available, via remote control)/
Frequency Range : 20 Hz ... 20 kHz/
Sensitivity at 1 kHz into 1 kohm : 12 mv/Pa/
Rated Impedance : 50 Ohms/
Rated load impedance : 1000 Ohms/
Equivalent noise level, CCIR 1 : 20 dB/
Equivalent noise level, A-weighted 2 : 8 dB-A/Maximum SPL for THD 0.5% 3 :140/
Maximum SPL for THD 0.5% with preattenuation 4 :154/
Signal-to-noise ratio, CCIR (re. 94 dB SPL) 5 :74 dB/
Signal-to-noise ratio, A-weighted (re. 94 dB SPL) 6 :86 dB/
Maximum output voltage :10 dBu/
Supply voltage (P48, IEC 61938) :48 V ± 4 V/
Current consumption (P48, IEC 61938) :3.2 mA/
Matching connector :XLR 3 F/
Weight :450 g/
Diameter :57 mm/Length :173 mm
We use cookies to keep our websites running and secure, and to help us provide you with the best possible experience. By clicking "Accept", you consent to the use of these cookies for advertising and analytical purposes.