Projector type 3-Chip DLP™ projector
DLP™ chip
Panel size 24.4 mm (0.96 in) diagonal (16:10 aspect ratio)
Display method DLP™ chip x 3, DLP™ projection system
Number of pixels 2,304,000 (1920 x 1200 pixels) x 3
Light source Laser diodes (Blue LD, Red LD)
Light output 30,500 lm*1/32,000 lm (Center)*2
Time until light output declines to 50 %*3 20,000 hours (Normal), 24,000 hours (Eco), 26,000 hours (Quiet)
Resolution 4K (3840 x 2400 pixels) (Quad Pixel Drive: ON) WUXGA (1920 x 1200 pixels)
Contrast ratio*1 20,000:1 (Full On/Full Off, Dynamic Contrast [3])
Screen size (diagonal) 1.78–25.4 m (70–1,000 in), 1.78–15.24 m (70–600 in) with ET-D75LE8/ET-D3LET80, 3.05–15.24 m (120–600 in) with ET-D75LE95, 5.08–15.24 m (200–600 in) with ET-D3LEU100/ET-D3LEW200
Center-to-corner zone ratio*1 90 %
Lens Optional (no lens included with this model)
Lens shift*4 (From the origin point of the lens mounter)
Vertical ±55 % (+78 %, +68 % with ET-D75LE95, ±48 % with ET-D3LEW200, ±44 % with ET-D75LE6/ET-D3LEW60) (powered)
Horizontal ±20 % (±15 % with ET-D75LE6/ET-D3LEW60/ET-D3LEW200, ±12 % with ET-D75LE95, +25 %, 0 % with ET-D3LEU100) (powered)
Keystone correction range Vertical: ±45 ° (± 40 ° with ET-D75LE10/ET-D3LEW10/ET-D75LE20/ET-D3LES20, ±28 ° with ET-D75LE6/ET-D3LEW60, ±22 ° with ET-D3LEW50, ±15 ° with ET-D3LEW200, ±8 ° with ET-D3LEU100, +5 ° with ET-D75LE95),
Horizontal: ±40 ° (±15 ° with ET-D3LEW50/ET-D75LE6/ET-D3LEW60, ±5 ° with ET-D3LEU100/ET-D3LEW200, 0 ° with ET-D75LE95)
When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55 °.
Installation Ceiling/floor, front/rear, free 360-degree installation
Terminals
SDI IN — BNC x 1: 3G/HD-SDI input
HDMI IN HDMI x 1 (Deep Color, compatible with HDCP 2.2, 4K/60p signal input*5)
DVI-D IN — DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP) (Single-link only)
MULTI PROJECTOR SYNC IN BNC x 1 —
MULTI PROJECTOR SYNC OUT BNC x 1 —
MULTI PROJECTOR SYNC IN terminal/3D SYNC 1 IN/OUT terminal
(dual purpose) — BNC x 1
MULTI PROJECTOR SYNC OUT terminal/3D SYNC 2 OUT terminal (dual purpose) — BNC x 1
SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
SERIAL OUT D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
REMOTE 1 IN M3 stereo mini-jack x 1 for wired remote control
REMOTE 1 OUT M3 stereo mini-jack x 1 for link control
REMOTE 2 IN D-sub 9-pin (female) x 1 for external control (parallel)
DIGITAL LINK RJ-45 x 1 for network and DIGITAL LINK connection (HDBaseT™ compliant), 100Base-TX, compatible with Art-Net, PJLink™ (Class 2), Deep Color, HDCP 2.2, 4K/60p signal input*5
LAN RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible
USB USB connector (Type A) x 1 for optional Wireless Module (AJ-WM50 Series)/USB Memory Stick
DC OUT USB Type A x 2 (for power supply, DC 5 V total of 2 A)
Expansion slot SLOT 1/SLOT 2 (total two terminals, vacant) for interface boards, SLOT NX compatible SLOT (one terminal, vacant) for interface boards, SLOT NX compatible
Power supply AC 200 V–240 V (Light output will decrease when using the projector with AC 100 V to AC 120 V)
Power consumption 2,550 W (Standby: 14 W) 2,450 W (Standby: 13 W)
Cabinet materials Molded plastic
Operation noise*1 49 dB (Normal), 46 dB (Quiet)
Dimensions (W x H x D) Approx. 598 x 353 x 780 mm (23 17/32˝ x 13 29/32˝ x 30 23/32˝) (not including protruding parts)
Weight*6 69.8 kg (153.9 lbs) 68.6 kg (151.2 lbs)
Operating environment Operating temperature: 0–45 °C (32–113 °F)*7, operating humidity: 10–80 % (no condensation)
Applicable software Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Smart Projector Control for iOS/Android™

Share via