AudioMTX5D YAMAHA Processing Matrix 34 x 16 - Dante
Quantity
ex
Project List Available
Description
Characteristics
Share
Product file
The MTX5-D signal processor is specifically designed for small to medium-sized systems, such as those found in retail establishments or reception rooms. It features a 34 x 16 channel matrix mixer, 3-band parametric EQ, compressor/gate, automatic gain control, eight priority duckers, and eight feedback suppressors. It also has all the features of a high quality, high performance processor on the output side, such as 4-band parametric EQ, delay and speaker processor.
Product Features
Dimensions (W x H x D)480(W) x 88(H) x 351(D) mm, 2U
Weight6.3 kg
Power supply voltage Japan: 100V 50/60HzUSA/Canada: 110V-240V 50/60HzOther: 110V-240V 50/60Hz
Power consumption65 W max.
Heat dissipation (per hour)55.9 kcal max.
Operating temperature range0 °C-40 °C
Storage temperature range-20 °C-60 °C
NC23 value (1 m from front panel)
Number of memories
Preset memories: 50
Maximum number of units that can be used simultaneously Four MTX units (However, in a system where only every fourth MTX unit is connected, a total of 20 devices including EXi8, EXo8, XMV units can be connected)
Power cord length 2.5 m
Items supplied
Power cord, Euroblock plugs (3-pin, with tabs) x 16, Euroblock plugs (16-pin) x 2, cable tie x 16, user manual
Options sold separately
DCP1V4S-US/EU, DCP4S-US/EU, DCP4V4S-US/EU digital control panels
Electrical Specifications
Sampling frequency48 kHz/44.1 kHz
Signal delayLess than 3.0ms, (AN-NA at 48 kHz)
Frequency Response20 Hz to 20 kHz, -1.5 dB min, 0 dB typical, +0.5 dB max.
Total harmonic distortionLess than 0.05% (+4 dBu, Gain: -6 dB); less than 0.1% (+4 dBu, Gain: +66 dB)
Dynamic range107 dB (Gain: -6 dB)
Equivalent Input Noise (EIN)-126 dBu (Gain: +66 dB)
Crosstalk/Channel Separation-100 dB (at 1 kHz)
Maximum cable length
YDIF] connector: 30 meters (cable length between units)
DCP] connector: 200 meters (total cable length from MTX5-D processor to last DCP panel)
Indicator s
INPUT PEAK: RED - 3 dBFS
INPUT SIGNAL: GREEN -40 dBFS
OUTPUT SIGNAL: GREEN -40 dBFS
Phantom power48 V (per channel, individually adjustable)
Connector Specifications
Format [GPI] connector: IN (channels 1-15): 0-5 VIN (16 channels): 2.5-24 V: High, 2.5 V or less: Low, Assignable input +24 VOUT: open collector+V: 5 V DC
Dante [PRIMARY]/[SECONDARY] connector: 1000Base-TC [RS-232C] connector: RS-232C (Baud rate: 38.4 kbps/115.2 kbps)
Cable specifications
DCP] Connector: CAT5e or higher type Ethernet cable (Straight-through cable. All 8 pins must be connected.)
YDIF] connector: CAT5e or higher type STP Ethernet cable (Straight-through cable. All 8 pins must be connected.)
Dante [PRIMARY]/[SECONDARY] connector: Ethernet STP cable type CAT5e or higher
Dimensions (W x H x D)480(W) x 88(H) x 351(D) mm, 2U
Weight6.3 kg
Power supply voltage Japan: 100V 50/60HzUSA/Canada: 110V-240V 50/60HzOther: 110V-240V 50/60Hz
Power consumption65 W max.
Heat dissipation (per hour)55.9 kcal max.
Operating temperature range0 °C-40 °C
Storage temperature range-20 °C-60 °C
NC23 value (1 m from front panel)
Number of memories
Preset memories: 50
Maximum number of units that can be used simultaneously Four MTX units (However, in a system where only every fourth MTX unit is connected, a total of 20 devices including EXi8, EXo8, XMV units can be connected)
Power cord length 2.5 m
Items supplied
Power cord, Euroblock plugs (3-pin, with tabs) x 16, Euroblock plugs (16-pin) x 2, cable tie x 16, user manual
Options sold separately
DCP1V4S-US/EU, DCP4S-US/EU, DCP4V4S-US/EU digital control panels
Electrical Specifications
Sampling frequency48 kHz/44.1 kHz
Signal delayLess than 3.0ms, (AN-NA at 48 kHz)
Frequency Response20 Hz to 20 kHz, -1.5 dB min, 0 dB typical, +0.5 dB max.
Total harmonic distortionLess than 0.05% (+4 dBu, Gain: -6 dB); less than 0.1% (+4 dBu, Gain: +66 dB)
Dynamic range107 dB (Gain: -6 dB)
Equivalent Input Noise (EIN)-126 dBu (Gain: +66 dB)
Crosstalk/Channel Separation-100 dB (at 1 kHz)
Maximum cable length
YDIF] connector: 30 meters (cable length between units)
DCP] connector: 200 meters (total cable length from MTX5-D processor to last DCP panel)
Indicator s
INPUT PEAK: RED - 3 dBFS
INPUT SIGNAL: GREEN -40 dBFS
OUTPUT SIGNAL: GREEN -40 dBFS
Phantom power48 V (per channel, individually adjustable)
Connector Specifications
Format [GPI] connector: IN (channels 1-15): 0-5 VIN (16 channels): 2.5-24 V: High, 2.5 V or less: Low, Assignable input +24 VOUT: open collector+V: 5 V DC
Dante [PRIMARY]/[SECONDARY] connector: 1000Base-TC [RS-232C] connector: RS-232C (Baud rate: 38.4 kbps/115.2 kbps)
Cable specifications
DCP] Connector: CAT5e or higher type Ethernet cable (Straight-through cable. All 8 pins must be connected.)
YDIF] connector: CAT5e or higher type STP Ethernet cable (Straight-through cable. All 8 pins must be connected.)
Dante [PRIMARY]/[SECONDARY] connector: Ethernet STP cable type CAT5e or higher